How to setup a hypervisor in ubuntu 18.04 with KVM and Kimchi
In this guide, we will be making our own Hypervisor in Ubuntu 16.04 by installing KVM (Kernel-based Virtual Machine) as well as Kimchi, which is a free, open-source web-based virtualization management platform so we can manage our hypervisor easily through the web browser.
You can find more info on Kimchi here
Installing kvm
Connect to your server as the admin user via SSH.
ssh [email protected]
Update and upgrade your web server
sudo apt update && sudo apt upgrade -y
Install KVM and all dependencies required for Kimchi and Wok
sudo apt install qemu qemu-kvm libvirt-bin python-paramiko python-pil novnc python-libvirt python-ethtool python-ipaddr python-guestfs libguestfs-tools spice-html5 spice-html5 python-magic keyutils libnfsidmap2 libtirpc1 nfs-common rpcbind python-configobj python-parted -y
Note: If you receive an error about packages not found
You must enable the Universe Repository by running.
sudo add-apt-repository universe
Verify the kvm installation
$ kvm-ok
This is what you should see if KVM is supported INFO: /dev/kvm exists
KVM acceleration can be used
Installing Kimchi:
sudo apt install nginx -y
wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/wok-2.5.0-0.noarch.deb
wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/kimchi-2.5.0-0.noarch.deb
Installing dependencies:
sudo dpkg -i wok-2.5.0-0.noarch.deb
sudo apt install -f -y
sudo dpkg --ignore-depends=python-imaging -i kimchi-2.5.0-0.noarch.deb
#reboot here
sudo shutdown -r now
#If you have UFW enabled please add the port
sudo ufw allow 8001/tcp
Fixing Problem with Kimchi Package Dependancies.
Remove python-imaging from the Kimchi dependancies, this was replaced with Python-pil and is no longer needed and must be removed to avoid the apt command from uninstalling Kimchi due to unmet dependancies.
to do this you must edit the /var/lib/dpkg/status file and find the line Package: kimchi , under this you must remove the python-imaging or rename it to python-pil in the Depends: clause as shown below
…… Package: kimchi Status: install ok installed Priority: optional Section: base
Maintainer: Aline Manera [email protected]
Architecture: all Version: 2.5.0
Depends: wok (>= 2.1.0),
python-imaging, python-configobj, novnc, python-jsonschema (>= 1.3.0), python-libvirt, gettext, libvirt-bin, nfs-common, qemu-kvm, python-parted, python-psutil (>= 0.6.0), python-ethtool, sosreport, python-ipadd$Description: Kimchi web application Build-Depends: xsltproc, gettext, python-lxml
……
Now open the web interface on
https://Server_IP:8001 You should see the following Now lets create our first VM, we need to log in using your normal ubuntu username and password.
For testing we will download an Ubuntu Server image to the /var/lib/kimchi/isos directory which is the default path to the ISO repository
cd /var/lib/kimchi/isos sudo wget http://releases.ubuntu.com/16.04.2/ubuntu-16.04.2-server-amd64.iso
Now from the web interface we go to Virtualization > Templates > + Add Template
In this case i am selecting, the 16.04.2 Template and then click on Create this should add a new template as shown below
Feel free to add more ram, CPU, disk space as desired using the actions > edit button, at this point, it is just a template and not yet a vm.
Now we will create a vm using this template.
From the web interface we go to Virtualization > Guests > + Add Guest
Then we choose the VM Name and the template to use and hit create.
Important Note: Do not include any spaces in your VM name or you will be unable to start your VM.
Once this is done, it is time to start your VM by pressing the Actions Menu > Start option
That’s it you now have a working Ubuntu VM running, you can press the view console link to access your VM’s console.
Optional Change Port to 443:
Change the port in the Nginx Config
sudo nano /etc/nginx/conf.d/wok.conf
Look for the following line
listen 0.0.0.0:8001 ssl;
Change it to
listen 0.0.0.0:443 ssl;
Also locate inside of location / config
proxy_redirect http://127.0.0.1:8010/ https://$host:8001/;
Change this to
proxy_redirect http://127.0.0.1:8010/ https://$host:443/;
Change the port in the Wok config
sudo nano /etc/wok/wok.conf
Uncomment the following line
#proxy_port = 8001
Change it to
proxy_port = 443
If you have UFW enabled please add the port
sudo ufw allow 443/tcp
Restart Wok and Nginx
sudo service wokd restart sudo service nginx restart
That is it now you can open the web interface on
https://Server_IP
Problems you may encounter :
Fix Bug with Template creation with Ubuntu 18.04 Template
This is a bug in the current stable release that has not yet been fixed, you will see the error below when this occurs.
KCHTMPL0020E: Unable to create template due error: KCHIMG0001E: Error probing image OS information: part_list: parted print: /dev/sda: Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
Manual Fix
Step 1
Edit the file /usr/lib/python2.7/dist-packages/wok/plugins/kimchi/model/templates.py
Search for the line:
...
ISO_TYPE = "ISO 9660 CD-ROM"
...
Replace with
...
ISO_TYPE = ["DOS/MBR", "ISO 9660 CD-ROM"]
...
Step 2
Search for the line:
...
if ISO_TYPE in ftype:
...
Replace with
Note:(Empty characters are important)
...
iscdrom = ®
if iscdrom:
...
Automated
replace file with patched on from github
sudo wget -q https://raw.githubusercontent.com/kimchi-project/kimchi/1ec059af4040c50b1a7b9a34253510a46ca09d3b/model/templates.py -O /usr/lib/python2.7/dist-packages/wok/plugins/kimchi/model/templates.py
reboot here
sudo shutdown -r now
Thats it, you should now be able to use Ubuntu 18.04 templates
